The Dominican Republic has finalized low-power device rules for IoT, RFID, telemetry and smart metering systems operating in the 915–928 MHz band. On August 27, 2026, INDOTEL adopted Resolution No. 074-2026, establishing frequency, power and emission requirements for these applications.
Devices operate under a generic licence without an individual spectrum licence or specific frequency authorization. However, INDOTEL equipment homologation requirements continue to apply. Manufacturers must therefore ensure that device configurations meet the applicable operating limits.
Low-power device rules: permitted power levels
The resolution establishes different power limits according to the device category and transmission technology. All values below refer to equivalent isotropically radiated power (EIRP).
| Device category | Permitted band | Maximum EIRP |
|---|---|---|
| General low-power devices | 915–928 MHz | 100 mW |
| Frequency-hopping (FHSS) or digitally modulated systems | 915–928 MHz | 1 W |
| Industrial and commercial RFID systems | 920–926 MHz exclusively | 4 W, when necessary for satisfactory operation |
Industrial and commercial RFID systems may use the specified higher power indoors or outdoors. Nevertheless, the 4 W allowance applies exclusively within 920–926 MHz. Manufacturers must distinguish this narrower operating range from the broader 915–928 MHz band.
Hopping frequencies and emission requirements
FHSS systems must use at least 20 hopping frequencies. Meanwhile, digitally modulated systems must meet a peak radiated power spectral density limit of 25 mW per 3 kHz.
Additionally, unwanted-emission limits apply to the specified RFID systems. Manufacturers must consider these requirements alongside the relevant frequency and power limits when configuring equipment for INDOTEL homologation.
Generic licensing and continued homologation
The generic licence allows spectrum use without individual frequency authorization. It does not remove equipment homologation requirements.
Moreover, spectrum use is shared and provides no protection against interference. Device operation must therefore comply with the applicable technical conditions within this shared spectrum framework.
For manufacturers, the key action is to verify that each device configuration matches its permitted frequency range, power level and emission requirements.
Timing: distinguish appeals from compliance
The resolution does not specify a separate effective date or transition period. It establishes a 30-business-day period for administrative or judicial appeals following notification or official publication, as applicable.
Important: The 30-business-day appeal period is not a compliance grace period.
Impact Assessment
-
Technical Standards?
No -
Type Approval & Market Access?
Yes -
Imports, Customs, Trade, or Market Surveillance?
No -
Spectrum Management?
Yes
